BMW 440i2016–20203.0L Straight-Six Turbo (B58)

BMW 440i Engine Replacement —Compare Prices &
Get Quotes

Get quotes today from trusted UK BMW 4 Series specialists. Compare reconditioned, rebuilt and used B58 3.0-litre turbo engines — supply & fit available nationwide.

  • Supply &Fit Available
  • 12-MonthWarranty
  • NationwideDelivery
  • 20+Specialists

BMW 440i Engines — from £3,500 to £10,500Common code: B58B30M0 / B58B30O1

  • Instant Quotes
  • No Obligation
  • 100% Free
  • Reconditioned
  • Rebuilt
  • Used
  • Supply & Fit Available
  • UK-Wide Network

The 440i Through Time — Era Map

One generation. One era. One guide to reliability, costs and what really matters.

Era Note

One engine throughout this badge's history — no era ambiguity.

Why use this era map?

Every cost guide, reliability rating and engine code on this page is aligned to the data above. This keeps everything consistent and trustworthy.

  • Real UKCost Data
  • VerifiedReliability
  • ExpertInsights
  • Updated for2025

BMW 440i Engine Replacement Costs

  • Supply Only£4,500 – £7,500
  • Fitted (Indie)£5,800 – £9,000
  • Warranty12–24 months
  • Best ForMost owners — best cost/warranty balance

Figures above reflect the B58 3.0-litre turbo petrol engine. Used engines are available from approximately £3,500–£5,500, with reconditioned units ranging from £4,500–£7,500. Newer B58 engines typically sit in the £5,500–£7,500 band.

Labour estimate: Fitting a 440i engine typically takes 12–16 hours at £70–£100/hr (independent) or £120–£180/hr (London/SE dealer).

Compare 440i engine prices from UK specialists

Common Problems With BMW 440i Engines

1. Oil Filter Housing Leaks

  • Symptoms: Oil spots under the car, burning oil smell from the engine bay, low oil level warning, visible oil residue around the oil filter housing area.

  • Typical Mileage: 60,000–100,000 miles (around 8 years)

  • Repair Cost: £500–£1,200 (oil filter housing replacement)【PLACEHOLDER — confirm vs cost sheet】

  • Replacement Cost: N/A — repair only

  • Urgency: Check — book inspection urgently

Our recommendation:

The B58's oil filter housing is made of plastic and is prone to cracking and leaking. If the housing fails, oil and coolant can mix — a potentially catastrophic failure. If you notice oil spots or a burning smell, have the oil filter housing inspected promptly. An aftermarket metal housing upgrade is available.

Read the full oil leak guide /failures/n55-valve-cover-oil-leak

Ready to Compare?

Get Matched With a Vetted BMW Specialist

20+ vetted BMW specialists, every 440i B58 era covered, with a 12-month warranty as standard.

Get My Free 440i Engine Quotes Now

440i — Repair, Buy, or Replace?

Not every issue means a new engine.Here’s what can be repaired, when it makes sense, and what to check before you buy.

Can It Be Repaired?

ProblemRepairable? · Typical Cost

Oil filter housing leak

Yes£500 – £1,200

Well-understood fix; aftermarket metal housing available

Water pump failure

Yes£400 – £900

Straightforward fix; upgraded metal impeller available

PCV diaphragm failure

Yes£200 – £500

Affordable repair kit; far cheaper than valve cover replacement

VANOS solenoid wear

Yes£200 – £500

Simple repair; part of routine maintenance

Oil pump failure (early B58)

Sometimes£1,500 – £3,000

Early plastic oil pumps can fail catastrophically; 2020+ models switched to metal

Buying This 440i? Check These First

Buy if:

  • Full BMW service history with evidence of regular oil changes using BMW LL-01 approved oil
  • Post-2020 build (metal oil pump fitted from factory)
  • No coolant loss or overheating history
  • No rough idle, whistling, or smoke on startup

Avoid if:

  • Oil leaks with no documented oil filter housing inspection or replacement
  • Coolant loss with no cooling system service records
  • Rough idle or whistling from the engine (PCV diaphragm warning)
  • Engine warning light with no diagnosis

Closing verdict

The 440i's B58 is one of BMW's finest modern engines — a genuinely robust, powerful, and tunable straight-six that represents a significant step forward from the N55. It's not bulletproof — oil filter housing leaks, water pump failures, and PCV diaphragm issues are the price of entry — but these are well-understood, manageable fixes. Buy on documented history, not on faith. A well-maintained 440i is a £20,000–£35,000 future classic; a neglected one is a £7,000 engine replacement waiting to happen.

Don’t Guess. Compare.

Get real quotes from vetted UK specialists and make the right call for your 440i.

Compare 440i engine prices before you buy
  • 20+ Vetted SpecialistsUK Network
  • 12-Month Warrantyas Standard
  • Nationwide Delivery& Collection
  • Transparent PricingNo Hidden Fees
  • Thousands of 440iOwners Helped

Buying Checklist

Before you buy a used BMW 440i (or before you commit to an engine replacement), check these:

  1. 1. Cold Start

    Listen for rough idle, whistling, or smoke (PCV diaphragm warning)

  2. 2. Service History

    Including the B58 era (2016–2020) and confirmed oil-change intervals using BMW LL-01 approved oil

  3. 3. Oil Leak Check

    Any history of oil leaks? (oil filter housing is a known weak point)

  4. 4. Coolant Check

    Any history of coolant loss or water pump/thermostat replacement?

  5. 5. Smoke Check

    White or blue smoke on startup can indicate PCV or turbo issues

  6. 6. VANOS Operation

    Any hesitation, rough idle, or loss of power? (VANOS solenoid warning)

  7. 7. Engine Warning Light

    Have codes been read? Any unresolved VANOS, cooling system, or PCV issues?

  8. 8. MOT History

    Check for emissions-related failures

Why this matters

A 10-minute check now can save you thousands later. The right 440i is a superb long-term car — the wrong one can be expensive fast.

Engine Codes

This table's rows match Section 1B's Era Map exactly.

B58B30M0 / B58B30O1 (3.0L Straight-Six Turbo)

B58B30M0 / B58B30O1 (3.0L Straight-Six Turbo)

Years
2016–2020
Power
326–340 PS (240–250 kW) @ 5,000–6,500 rpm · 500 Nm @ 1,600–4,500 rpm
2025 Enquiries
—(pattern data)
Avg. Recon Cost
£4,500–£7,500[PLACEHOLDER]

Technical SpecsB58B30M0 / B58B30O1

Displacement
2,998 cc
Cylinders
Straight-6, 4 valves per cylinder, DOHC
Compression Ratio
10.2:1
Fuel System
Direct injection
Turbocharger
Single twin-scroll turbocharger with air-to-liquid intercooler
Valvetrain
VALVETRONIC with Double VANOS
Compare 440i engine prices for your BMWGet quotes from trusted UK specialists in minutes.

Market Intelligence

Real data from thousands of 440i enquiries in 2025.

Most Common FailureOil filter housing leaks

The B58's most notable weakness

Average Enquiry Mileage

55,000–85,000

miles

[PATTERN DATA]

Average Replacement Cost

£4,500–£7,500

reconditioned, supply only

[PLACEHOLDER]

Most Requested Engine Code

B58B30M0 / B58B30O1

[PATTERN DATA]

Peak Enquiry Season

Winter

Cold starts expose PCV and cooling system issues

[PATTERN DATA]

Regional Demand

London
20%
South East
18%
North West
12%
Other Regions
50%
[PATTERN DATA]

Regional Demand Breakdown

20%London18%South East12%North West50%Other Regions

Frequently Asked Questions

Disclaimer: All prices are indicative UK market ranges based on historical quote data from our network of engine specialists.
Actual costs vary by variant, engine code, damage severity and workshop location. Use our free comparison tool to get tailored quotes.
Every engine supplied through EnginesMarket carries a minimum 12-month unlimited-mileage warranty — always confirm terms with your chosen supplier.

Why UK BMW 440i Owners Trust BMWEngines.uk

  • Trusted 440i B58 Suppliers

    every garage and engine rebuilder in our network is vetted, rated and reviewed by real 440i owners, as part of the Engine Finders network, covering the entire F32/F33/F36 B58 era from 2016 to 2020.

  • Compare 440i Engine Replacement Companies

    see prices, warranty terms and supply & fit options side-by-side before you commit, across every 4 Series that left the factory with this powerful 3.0-litre straight-six.

  • UK Engine Replacement Services for 440i

    supply-only or full supply & fit available nationwide, covering the full F32/F33/F36 production run — and we're vetted across every era of this badge.

Find the best BMW 440i engine replacement UK drivers rely on.

Compare prices from trusted specialists on EnginesMarket today and get your 4 Series back on the road with confidence.

Compare BMW 440i Engine Prices Now